home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Software Vault: The Gold Collection
/
Software Vault - The Gold Collection (American Databankers) (1993).ISO
/
cdr37
/
zhint49.zip
/
POPPMAN
< prev
next >
Wrap
Text File
|
1993-03-23
|
2KB
|
53 lines
Use POPPRINT in DOS to fax any non-ASCII file. You run FAXMAN then
POPPRINT. Faxman will use EMS if available.
C:\MTEZ>faxman C:\MTEZ>popprint
You do NOT run MTEZ. From your DOS application (Wordperfect for example),
You set up a Printer Driver ( >>>Epson FX85, RX80 or FX80<<< ). Then you
press the 2 <shift> keys which will give a 'beep'. Then PRINT the file
with the Epson driver from that application (not MTEZ). POPPRINT will
capture the output, and when done, present a window, ready to fax.
If the window does not appear, the TEMP directory in SET TEMP= or SET
TMP= in Autoexec.bat may not exist (or point to a non-existant TEMP
directory). Also may be TSR problem. If you get garbage, you have the
wrong Printer Driver in Word Perfect.
One thing you must also remember, Popprint cannot fax fonts built-into
your printer. Only fonts actually sent TO your printer, or built into MTEZ.
Popprint uses conventional memory only. If you are not going to be
using Popprint you may want to remove it, and reload it only as needed.
C:\MTEZ>popprint /r
USING FAXMAN
C:\MTEZ>faxman
to recv or send a fax. If you get an Error and it doesn't load check the
Faxman Setup
C:\MTEZ>setup
and see if the port is set correctly there. When Faxman is loaded you do
not have to do anything else to recv a fax. (but you must NOT be in MTEZ in
Data Mode, or AutoAnswer or Host). If Faxman isn't loaded you cannot change
TYPE in the dialing directory to FAX. If EMS is enabled Faxman will load
most of itself there, saving conventional memory.
C:\MTEZ>faxman /r
will remove Faxman. If you got 1-disk MTEZ you can set RINGs in CAS setup
to 6 or more, and manually answer fax (when you pick up the phone) with
<ctrl><alt>A hotkey. If you have EMS, faxman will use it if you set that
feild in SETUP.
NITELINE is used (after Faxman) when you will be away from the
computer and want faxes printed as they are recv'd. It is not a good idea
to use NITELINE during the day (unless the PC is dedicated to fax) as it
ties up the PC quite a lot.
Recv'd faxes are GRAPHICS and may be viewed & printed from Expressfax
menu.
Don Hinds - Zoom Tech
##include=c:\text\signa.tif